Professional Plastic Fiber Cutter - Works with 0.75mm and 1.0mm Cladding Fibers

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Professional Plastic Fiber Cutter - Works with 0.75mm and 1.0mm Cladding FibersThis fiber cutter produces precise cuts and fiber ends that exceed quality which can be obtained with other cutting tools, plus it is many times faster than polishing. It is very easy to use insert the fiber and press down on the blade. This device also uses standard single edge razor blades which are replaced by removing a single screw. Each blade is good for at least 50 cuts of the simplex communication fiber, which puts your per cut cost at about

1300 +50/-10

Dimension 19 X 17 X 8

5 mm (FMAE-U25) and 1

FPSA-PC: ConnectorMax software for single fiber connectors (includes viewer software for single fiber connector Pass/Fail analysis

5um)/550mtr (50um)

and D) or four (A version) round cable ports are provided in a wrap-around block with pre-installed gel profile for cable sealing

Relative humidity: 0 % to 95 % non-condensing

four for single fiber splices and one for mass fiber splices

This tool is factory preset with 12 fiber count and no adjustments are necessary

telephone wire

Enclosures are unloaded

Available in three sizes (A