Takaab 2HWR-1U - Dual Passive Half Wave Rectifier 1U tile

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Takaab 2HWR-1U - Dual Passive Half Wave Rectifier 1U tileOur passive diode rectifier now in 1U. Each of the two gates has one input and two outputs. Assuming an AC signal at the input, the first +ve out will output only the positive part of the original signal. Conversely the ve out will output any negative voltage parts of the signal. Note that there is a drop of approximately 0. 3V. You can actually use the 2HWR in reverse. Using the OUTs as INs and the IN as an OUT will rectify both signals then sum them

Version 3 is exactly the same circuit as v2

A basic but useful 6HP three channel powered mixer for your Eurorack Synthesizer

Many eurorack modules including several in the Takaab range include on-board jumpable headers that allow the user to toggle function either with a jumper or a dedicated expander module

54mm 2-pin jumper cable to connect to one of the three pin pairs on the MIX

02db (50% drop)

This gives some extra punch

Plugging separate jacks into both the A and R inputs will give independent gate switching of each of these parameters

Conversely the -ve out will output any negative voltage parts of the signal

or use it to convert any waveform into a pulse wave

make acid scream or as a rudimentary waveshaper

pins 11-12

Size: (1U x 12HP) 60

Exchange/Return Notes