Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Two-Hole PlateTwo hole plates are only used with standard CESF and small hybrid ESF frames allowing frame construction with different diameter rings, mounting hinges "outboard" off ring surface, or elongation of partial ring assemblies. Also valuable with free form frame construction. Recommended inclusion in all CESF and hybrid ESF packs.

The central area of the pin shaft is factory-roughened to enhance the interface between the acrylic frame and pin

10 mm wrench flats

Keeping the TRO (tapered thread-run-out) junction close to the bone maximizes the length of the larger diameter pin shaft between clamp and bone

Utilized to span rings and turn paired nylon nuts simultaneously to achieve compression or distraction

paired nylon nuts and double wrenches adequately provide this ability

Once locked

The single SK ESF clamp is the primary construction element of any linear fixator

The standard hand chuck includes a cannulated extension to provide hand protection when placing long pins and will grip pins from 0

the cloth drill shroud provides a sterile field when using a non-sterile power drill

Cartridges can be reused until the resin is depleted or expired

Angular motor hinge screws should be loosened using a 3 mm hex driver prior to steam sterilization and returned to normal position at surgery

Standard length versions manage most cases but extended length versions (denoted with "L" in the part number) are occasionally useful when additional thread length is needed to span both bone cortices

Exchange/Return Notes