Ball Joint Remover Speedway Spindle - WM130-S

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Ball Joint Remover Speedway Spindle - WM130-SPickle forks suck! Our remover actually works. With the nut off the lower ball joint, simply place the remover between ball joint tips, apply pressure, tap the spindle, and the ball joint pops out. You then flip tool over and add the extension to remove the upper ball joint. This one is specifically designed for the 3 piece Speedway spindles

The two independent housings are bolted together in the middle to lock the brake to the cage or unbolted to hook up the brake floater rod and run separated

Clears firewall that is minimum 7" from back of block

-Includes solid brass mechanisms and tough phenolic bodies

Engineered to provide no clearance issues with oil filter

Wehrs 5-1/2" spring drop cup that captures the spring by the OD

2 lock out collars

10204C - Simpson RX Super Bandit and Champ (nose notch) Diamondback

This is an easy way to attach a chain on a stock Chevelle lower

11'' Long 1''-8 coarse screw jack

Side Pro Elite

The outer lip is 1-3/4" tall to help keep the spring inside the bucket

3rd set point: LED and gauge backlight flash

Exchange/Return Notes